Advertisement
Quick Links
Advertisement
Related Manuals for WaterLogic PUREZZA CLASSE
Summary of Contents for WaterLogic PUREZZA CLASSE
- Page 1 PUREZZA CLASSE BASE CABINET...
- Page 2 Waterlogic water purification systems should be combined with selected water treatment components to create a system specifically tailored for each application by trained and qualified personnel. Products manufactured and marketed by Waterlogic and its affiliates are protected by patents. Waterlogic International Limited and WLI Trading Limited reserve the right,...
- Page 3 TABLE OF CONTENTS PRECAUTIONS AND GENERAL ....................... 3 PRODUCT INFORMATION ......................5 INSTALL AND ASSEMBLY ......................7...
- Page 4 Use a water pressure regulator: Waterlogic will not be responsible for injury or damage caused by excessive water pressure. Input or feed pressure must be regulated to 3 bar.
- Page 5 (RCD) having a rated residual operating current not exceeding 30 mA. Use only Waterlogic supplied power cord. Never use extension cords or power strips to connect unit. Do not use if the supply cord is damaged, it must be replaced by the service agent or a similarly qualified person in order to avoid a hazard.
- Page 6 PRODUCT INFORMATION PUREZZA CLASSE BASE CABINET 2.1 CONTENTS Item N Image Description Rubber Feet Down Panel Bottom Hinge/Top Hinge Side panel (L/R) Middle Shelf Top Shelf Back Panel Front Panel...
- Page 7 2.2 TECHNICAL INFORMATION TECHNICAL DATA CLASSE BASE CABINET Physical Dimensions (W x D x H) [mm] 400mm(W) X 590mm(D) X 824mm(H) Weight (net) [kg] 4.2kg...
- Page 8 Ensure all local laws and codes including health and safety guidelines are met when installing this Waterlogic purification system. Only qualified service technicians should attempt installation and service. Always read the entire operating instructions before using the appliance and save these instructions for future use.
- Page 9 2. Lay the down panel flat on its rubber feet (or Caster Wheels) with the bottom hinge facing towards you on the right-hand side. Locate the left-hand panel (item 4, page 5) and screw to the down panel as per below image; 3.
- Page 10 4. The base cabinet now has its core supports with the shelving. Locate the right-hand side panel (Item 4, page5) and screw the right-hand panel to the down panel, middle shelf and top shelf. 5. Locate the rear panel (item 7, page 5) for the base cabinet. It may be easier to lay the base cabinet on its front, carefully screw the back panel to the rear of the base cabinet as per the below image;...
- Page 11 6. The base cabinet should now feel sturdy and solid. The front panel (item 8, page 5) now needs to be fitted to the base cabinet. To do this, carefully slot the front panel into the bottom hinge (item 3, page 5) and rest the top panel against the base cabinet. Locate the top hinge and slot this into the top panel.
- Page 12 Waterlogic Trading Ltd WLI (UK) LTD +353 1 293 1960 info@waterlogic.ie WLI Trading Limited Second floor, Suite 4, Waterlogic International LTD Global Beacon Court, Sandyford, Co. Dublin, Ireland Headquarter 1 Grenfell Road, Maidenhead, Berkshire, SL6 1HN, United Kingdom support@waterlogicsupport.zendesk.com For technical support Email:...