WaterLogic CUBE FIREWALL Manual page 11

Dispensing your choice of water is very simple.
1. Place your cup centrally in the dispense area which is 6.4
inches dispense height. The Drip Tray can be removed for
filling bottles or other containers larger than the dispense
area.
2. Select the type of water you wish to be dispensed by
press/touching the cold, ambient or hot water select icon
until it illuminates.
3. Select the dispense button in the middle of the panel to
dispense water.
4. Water Selection is dispensed via a Push-To-Dispense
method. Press and hold the dispense button until your cup has reached the desired level.
WARNING! Unit produces Very Hot Water up to 203°F. Water above 125°F can cause severe
burns or scalding. Keep unauthorized people and children away from the unit to avoid accidental
dispensing of hot water. Children should not use without supervision.
WARNING! Always use a ceramic cup or a cup suitable for use with hot water.
WARNING! Do not hold cup or place hands in dispensing area while dispensing hot water.
WARNING! Never try to fill more than one cup at a time.
CUBE Manual Page 11 - Revision: 5-24-2017