Fault Codes - WaterLogic CUBE FIREWALL Manual

1. All Icons Flashing and Audible Alarm
2. UV Purification Icon Flashing
3. Filter Service Icon Flashing
4. Leak Detection Icon Flashing
UV Lamp Replacement and Filter Replacement Instructions are included in this
Troubleshooting Section.
1. All Icons Flashing and Audible Alarm
An overheat fault has been detected. Switch the CUBE Water Treatment System off
immediately and start fault finding procedures.
CUBE Manual

FAULT CODES

Solution
Page 59 - Revision: 5-24-2017