Advantech AIIS-1200 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Industrial PC
  5. AIIS-1200 Series
  6. User manual
Advantech AIIS-1200 User Manual

Advantech AIIS-1200 User Manual

Embedded ipc
Hide thumbs Also See for AIIS-1200:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
AIIS-1200
Embedded IPC

Advertisement

Table of Contents
loading

Related Manuals for Advantech AIIS-1200

Summary of Contents for Advantech AIIS-1200

  • Page 1 User Manual AIIS-1200 Embedded IPC...
  • Page 2 English user manual included as a PDF file on the CD. Please disregard the Chinese hard copy user manual if the product is not to be sold and/or installed in China. AIIS-1200 User Manual...
  • Page 3 The documentation and the software included with this product are copyrighted 2016 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice.
  • Page 4 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 5 Technical Support and Assistance Visit the Advantech web site at www.advantech.com/support, where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –...
  • Page 6 Notes provide optional additional information. Battery Information Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. AIIS-1200 User Manual...
  • Page 7 RESTRICTED ACCESS AREA: The equipment should only be installed in a Restricted Access Area. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. AIIS-1200 User Manual...
  • Page 8 AIIS-1200 User Manual viii...

  • Page 9: Table Of Contents

    Table 2.1: Jumper List ..............9 Connectors....................10 2.3.1 AIIS-1200 External I/O Connectors..........10 Figure 2.1 AIIS-1200 I/O connectors ......... 10 Table 2.2: COM Connector Pin Assignments......11 Figure 2.2 Ethernet Connector ..........11 Table 2.3: Ethernet Connector Pin Assignments....... 11 Figure 2.3 Audio Connector............
  • Page 10 Figure 2.11HDD assembly ............16 2.4.2 m-SATA/Mini-PCIe Installation ........... 16 2.4.3 AIIS-1200 MB IO connector............17 Chapter AMI BIOS Setup......... 19 Introduction ..................... 20 Entering Setup ..................21 3.2.1 Main Setup.................. 21 3.2.2 Advanced BIOS Features Setup..........23 3.2.3 Chipset..................34 3.2.4...

  • Page 11: Chapter 1 General Introduction

    Chapter General Introduction This chapter gives background information on AIIS-1200.

  • Page 12: Introduction

    SoC (System On Chip) platform and targeted at machine vision applications. The AIIS-1200 is an independent, fanless, Compact Embedded Box with a wide range of DC power inputs. The rugged aluminum case provides not only a great thermal solu- tion, but also resists high EMI/shock/vibration.

  • Page 13: Chipset

    Supports Wake on LAN Audio Codec: Realtek ALC892:  Compliant with HD Audio specifications  Supports 16/20/24-bit DAC and 16/20/24-bit ADC resolution  Supports: Line-out, Mic-in Audio  DAC supports 16/20/24-bit PCM format, multiple stereo recording BR2032 3 V/190mAh Battery AIIS-1200 User Manual...

  • Page 14: Mechanical Specifications

    Mechanical Specifications 1.4.1 Dimensions (Unit: mm) Figure 1.1 AIIS-1200P Mechanical Dimension Drawing (Unit: mm) (Unit: mm) Figure 1.2 AIIS-1200U Mechanical Dimension Drawing 1.4.2 Weight 1.1Kg (2.43lb) AIIS-1200 User Manual...

  • Page 15: Power Requirements

    5 ~ 500 Hz, 1 Oct/min., 1 hr/axis, x,y,z 3 axes. 1.6.6 Shock during operation  When system is equipped with SSD only: 20 G, IEC 60068-2-27, half sine, 11 ms duration. 1.6.7 Safety  CCC, UL 1.6.8  CE, FCC, CCC, BSMI AIIS-1200 User Manual...
  • Page 16 AIIS-1200 User Manual...

  • Page 17: Chapter 2 H/W Installation

    Chapter H/W Installation This chapter introduces external IO and the installation of AIIS-1200 hardware.

  • Page 18: Introduction

    2.2.1 Jumper description You may configure the AIIS-1200 to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 19: Jumper List

    Clear CMOS 2.2.2.2 System AT/ATX mode function option AIIS-1200 support AT or ATX mode and Default is ATX module. if you want to change to AT mode that you can find AT/ATX mode jumper in motherboard. PSON1 System AT/ATX mode option...

  • Page 20: Connectors

    Connectors 2.3.1 AIIS-1200 External I/O Connectors Front View Thermal Power USB3.0 USB3.0 LAN1 COM1/2 Buttton Module PoE 1/2 Module Rear View Line-out Display On/Off 9V~36V Mic-in USB3.0 Port Port Figure 2.1 AIIS-1200 I/O connectors AIIS-1200 User Manual...

  • Page 21: Table 2.2: Com Connector Pin Assignments

    2.3.1.2 Ethernet connector (LAN) AIIS-1200 is equipped with two Ethernet controllers that are fully compliant with IEEE 802.3u 10/100/1000 Mbps CSMA/CD standards. LAN1 is equipped with Intel i210IT. The Ethernet port provides a standard RJ45 jack connector with LED indicators on the front side to show its Active/Link status and Speed status.

  • Page 22: Figure 2.3 Audio Connector

    2.3.1.3 Audio connector AIIS-1200 has two stereo audio ports with phone jack connectors, one Line_Out, one Mic_In. The audio chip is ACL892, and it’s compliant with AZALIA standard. Figure 2.3 Audio Connector Table 2.4: Audio Connector Pin Assignments Audio Signal Name...

  • Page 23: Figure 2.5 Vga Connector

    2.3.1.5 VGA Connector The AIIS-1200 provides a high resolution VGA interface with a 15-pin D-sub connec- tor to support a VGA CRT monitor. It supports display resolution of up to 2048 x 1152 @ 60 Hz. Figure 2.5 VGA Connector Table 2.6: VGA Connector Pin Assignments...

  • Page 24: Figure 2.7 2-Pin Header

    2.3.1.8 Power ON/OFF button AIIS-1200 comes with a Power On/Off button with LED indicators on the front side to show its On status (Green LED) and Off/Suspend status (RED LED), that supports dual function of Soft Power-On/Off (instant off or delay 4 seconds), and suspend.

  • Page 25: Installation

    Remove chassis screws and extract the bottom cover Remove 4 screws to extract HDD tray. Secure the 4xHDD screws (P/N:1930004607) Assemble SATA cable/power cable and replace HDD tray to secure 4x screws. Replace Bottom cover. Figure 2.9 Open case AIIS-1200 User Manual...

  • Page 26: M-Sata/Mini-Pcie Installation

    Figure 2.10 HDD Rack assembly Figure 2.11 HDD assembly 2.4.2 m-SATA/Mini-PCIe Installation AIIS-1200 series supports 1 Mini-PCIE socket with PCIex1/mSATA/USB links.  Mini-PCIe socket: Supports PCIe x1/mSATA/USB links Remove chassis screws and extract the bottom cover. Install the module at Mini-PCIe socket and secure with screws.

  • Page 27: Aiis-1200 Mb Io Connector

    2.4.3 AIIS-1200 MB IO connector AIIS-1200 User Manual...
  • Page 28 AIIS-1200 User Manual...

  • Page 29: Ami Bios Setup

    Chapter AMI BIOS Setup This chapter introduces how to set BIOS configuration data.

  • Page 30: Introduction

    With the AMI BIOS Setup program, you can modify BIOS settings and control the special features of your computer. The Setup program uses a number of menus for making changes and turning special features on or off. This chapter describes the basic navigation of the AIIS-1200 setup screens. AIIS-1200 User Manual...

  • Page 31: Entering Setup

    The right frame displays the key legend. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white. Often a text message will accom- pany it. AIIS-1200 User Manual...
  • Page 32 Date using the <Arrow> keys. Enter new values through the keyboard. Press the <Tab> key or the <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. AIIS-1200 User Manual...

  • Page 33: Advanced Bios Features Setup

    3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the AIIS-1200 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as ACPI Settings and hit <enter> to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 34 Enable or disables BIOS ACPI auto configuration  Enable Hibernation Enables or disables Hibernation  ACPI Sleep State This item allows users to set ACPI mode S3 (Suspend to RAM) or to Disable  “ACPI Sleep State”. ACPI Sleep State AIIS-1200 User Manual...
  • Page 35 3.2.2.2 NCT6106D Super IO Configuration AIIS-1200 User Manual...
  • Page 36 Change Settings This item allows users to change settings of Serial Port 2. The default setting is "Auto".  Device Mode This item allows users to set the mode of Serial Port 2. The default setting is "RS-232". AIIS-1200 User Manual...
  • Page 37 3.2.2.3 NCT6106D HW Monitor  Digital I/O Configuration Configure the digital I/O pins.  CPU Warning Temperature This item allows users to change settings of CPU (PECI) Warning Temperature. The default setting is “Disabled”. AIIS-1200 User Manual...
  • Page 38 S5 RTC Wake Setting  Wake system from S5 Enable or disable system wake on alarm event. Select FixedTime, system will wake on the hr::min::sec specified. Select DynamicTime, system will wake on the current time + Increase minutes. AIIS-1200 User Manual...
  • Page 39 Select a COM port to display redirection of Legacy OS and Legacy OPROM Message.  Console Redirection setting This item allows users to enable or disable Console Redirection. Serial Port for Out-of-Band Management/Windows Emergency Management Services (EMS) AIIS-1200 User Manual...
  • Page 40 3.2.2.6 CPU Configuration  Socket 0 CPU Information CPU information overview  Limit CPUID Maximum Allows limiting CPUID Maximum AIIS-1200 User Manual...
  • Page 41 Enable or disable PCH to aggressively enter link power state. Serial ATA Port 0~1  Port 0~1 Enable or disable Port 0 device  Spin Up Device Enable or disable Spin Up Device.  Device Sleep Support Enable or disable device sleep support AIIS-1200 User Manual...
  • Page 42 3.2.2.8 Miscellaneous Configuration  SMBus Support Enable or disable SMBus support  Serial IRQ Enable or disable Serial IRQ support  Serial IRQ Mode Setup Serial IRQ mode; default is continuous AIIS-1200 User Manual...
  • Page 43 USB transfer Time-out To set different time mode for USB transfer Time-out.  Device reset Time-out To set different time modes for Device reset Time-out.  Device power-up delay To set different time mode for Device power-up delay. AIIS-1200 User Manual...

  • Page 44: Chipset

    3.2.3 Chipset AIIS-1200 User Manual...
  • Page 45 To set DVMT pre-allocated (fixed) capacity used by the internal graphics device.  DVMT Total Gfx Mem To set DVMT Total Gfx Mem capacity  Aperture Size To set Aperture Size  GTT Size To set GTT Size AIIS-1200 User Manual...
  • Page 46 3.2.3.1 USB Configuration  USB Configuration Enable or disable XHCI mode  Restore AC Power Loss Set up the behavior for what happens after AC power lost, then restored. AIIS-1200 User Manual...

  • Page 47: Security

    LAN PXE OpROM Enable or disable boot option for LAN controller 3.2.4 Security  Administrator Password This item allows users to set "Administrator Password" if desired.  User Password This item allows users to set "User Password" if desired. AIIS-1200 User Manual...

  • Page 48: Boot

     Quiet Boot This item allows users to disable or enable "Quiet Boot".  Boot Option Priorities Note! These items will display based on how many devices are attached. – Boot Option #1 – Boot Option #2 AIIS-1200 User Manual...

  • Page 49: Save & Exit

    This item allows users to Save as User Defaults.  Restore User Defaults This item allows users to Restore User Defaults.  Launch EFI Shell from file system device Attempts to Launch EFI Shell application (Shell.efi) form one of the available file system devices. AIIS-1200 User Manual...
  • Page 50 AIIS-1200 User Manual...

  • Page 51: Software Installation

    Chapter Software Installation This chapter introduces driver installation.

  • Page 52: Chipset Software Installation Utility

    4.1.1 Before you begin To facilitate the installation of the enhanced display drivers and utility software, read the instructions in this chapter carefully. The drivers for the AIIS-1200 are located on the software installation CD. Note! The files on the software installation CD are compressed. Do not attempt to install the drivers by copying the files manually.

  • Page 53: Windows 10 / Windows 8.1/ Windows 7

    Insert the driver CD into your system's CD-ROM drive. You can see the driver folders. Navigate to the "02 Graphic" folder and click the executable file to complete the installation of the drivers for Windows 7, Windows 8 and Windows 10. AIIS-1200 User Manual...

  • Page 54: Lan Configuration

    LAN Configuration 4.3.1 Introduction AIIS-1200 has single Gigabit Ethernet LANs, I210IT, via dedicated PCI Express x1 lanes that offer bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at 1000 Mbps. 4.3.2 Features ...

  • Page 55: Intel® Txe (Trusted Execution Engine) Setup

    Install USB3.0 4.5.1 Introduction AIIS-1200 provides 8 x USB 3.0 and the data transfer rate of USB3.0 (5Gb/s) is 10 times that of USB2.0 (480 Mbps). Insert the driver CD into your system’s CD-ROM drive. Navigate to the "04_USB3.0" folder to install the driver.
  • Page 56 AIIS-1200 User Manual...

  • Page 57: Appendix A Programming The Watchdog Timer

    Appendix Programming the Watchdog Timer...

  • Page 58: Programming The Watchdog Timer

    Programming the Watchdog Timer The AIIS-1200's watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to pro- gram it.
  • Page 59 Unlock NCT6106D Select register of watchdog timer Enable the function of the watchdog timer Use the function of the watchdog timer Lock NCT6106D AIIS-1200 User Manual...

  • Page 60: Table A.1: Watchdog Timer Registers

    0. [default=0] Bit 4: Read status of watchdog timer, 1 means timer is in a “timeout” condition. AA (hex) ----- Write this address to I/O port 2E (hex) to lock the watchdog timer 2. AIIS-1200 User Manual...

  • Page 61: Example Program

    Inc dx Mov al,10 Out dx,al ;----------------------------------------------------------- Dec dx ; Lock NCT6106D Mov al,0aah Out dx,al Enable watchdog timer and set 5 minutes as timeout interval ;----------------------------------------------------------- Mov dx,2eh ; Unlock NCT6106D Mov al,87h Out dx,al Out dx,al AIIS-1200 User Manual...
  • Page 62 Enable watchdog timer to be reset by mouse ;----------------------------------------------------------- Mov dx,2eh ; Unlock NCT6106D Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------- AIIS-1200 User Manual...
  • Page 63 Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable watchdog timer to be strobed reset by keyboard Mov al,0f2h Out dx,al Inc dx In al,dx Or al,40h Out dx,al AIIS-1200 User Manual...
  • Page 64 Dec dx ; Generate a time-out signal Mov al,0f2h Out dx,al ;Write 1 to bit 5 of F7 register Inc dx In al,dx Or al,20h Out dx,al ;----------------------------------------------------------- Dec dx ; Lock NCT6106D Mov al,0aah Out dx,al AIIS-1200 User Manual...

  • Page 65: Appendix B Programming The Gpio

    Appendix Programming the GPIO...

  • Page 66: Supported Gpio Register

    Extended Function Index Registers (EFIRs) The EFIRs are write-only registers with port address 2Eh or 4Eh on PC/AT systems. Extended Function Data Registers (EFDRs) The EFDRs are read/write registers with port address 2Fh or 4Fh on PC/AT systems AIIS-1200 User Manual...

  • Page 67: Gpio Example Program

    MOV AL, F1H OUT DX, AL MOV DX, 2FH MOV AL, ??H ; Put the output value into AL OUT DX, AL ------------------------------------------------------------ Exit extended function mode | ------------------------------------------------------------ MOV DX, 2EH MOV AL, AAH OUT DX, AL AIIS-1200 User Manual...

  • Page 68: Example Program (C Language)

    == 0x00){ InputValue |= 0x10; } else if (SetupData->NCT6106DDIO5 == 0x01) { OutputValue |= 0x10; if(SetupData->NCT6106DDIO6 == 0x00){ InputValue |= 0x20; } else if (SetupData->NCT6106DDIO6 == 0x01) { OutputValue |= 0x20; if(SetupData->NCT6106DDIO7 == 0x00){ InputValue |= 0x40; AIIS-1200 User Manual...
  • Page 69 Data = IoRead8(NCT6106D_CONFIG_DATA) & 0xFD; //AIIS1200-X003_3 IoWrite8(NCT6106D_CONFIG_DATA, Data); //AIIS1200-X003_3 IoWrite8(NCT6106D_CONFIG_INDEX, NCT6106D_LDN_SEL_REGISTER); IoWrite8(NCT6106D_CONFIG_DATA, NCT6106D_LDN_GPIO1); IoWrite8(NCT6106D_CONFIG_INDEX, NCT6106D_ACTIVATE_REGISTER); Data = IoRead8(NCT6106D_CONFIG_DATA) | 0x10; //AIIS1200-X003_3 IoWrite8(NCT6106D_CONFIG_DATA, Data); IoWrite8(NCT6106D_CONFIG_INDEX, 0xF0); //AIIS1200-X003_3 IoWrite8(NCT6106D_CONFIG_DATA, InputValue); IoWrite8(NCT6106D_CONFIG_INDEX, 0xF1); //AIIS1200-X003_3 IoWrite8(NCT6106D_CONFIG_DATA, OutputValue); SIOConfigExit(); } //if (SetupData->NCT6106DDIO == 0x01) //AIIS1200-X009_1 AIIS-1200 User Manual...
  • Page 70 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2016...

Table of Contents