Connecting To Iq Envoy; Connect Using The Installer Toolkit App; Method A: Use The Site's Wireless Router To Connect To The Iq Envoy; Method B: Create A Wireless Access Point - enphase IQ Envoy Installation And Operation Manual

Connecting to IQ Envoy

There are several ways to connect with the IQ Envoy to check status or do configuration tasks:
Connect wirelessly using Installer Toolkit
•
Connect remotely using Enlighten
•
Connect using a computer or mobile device with the IQ Envoy local interface
•

Connect Using the Installer Toolkit App

The Enphase Installer Toolkit is a mobile app that provides installers with onsite system configuration
capabilities. Options for establishing a connection between the Installer Toolkit app and the IQ Envoy are:
Connect the mobile device to the same LAN as the IQ Envoy using the site's wireless router.
•
Use the IQ Envoy to create a wireless Access Point (AP).
•

Method A: Use the Site's Wireless Router to Connect to the IQ Envoy

To use the site's wireless router, select Settings on your mobile device and then select Wi-Fi. Tap the
network you want to join from the list of available networks.

Method B: Create a Wireless Access Point

You can connect to the IQ Envoy without using the onsite router by creating a wireless Access Point (AP).
Use the built-in Wi-Fi functionality to do this. AP mode supports use of a mobile device and times out after
eight hours. The AP Mode LED
the IQ Envoy to Installer Toolkit so that you can track system installation progress.
To start an AP session:
Briefly press the AP Mode button to start an 8-hour AP session on the IQ Envoy. The AP Mode
C.
LED lights solid green when AP mode is active.
E. The AP Mode LED
after eight hours. This LED is usually off during normal IQ Envoy operation.
25
lights solid green when AP mode is active. AP Mode allows you to connect
remains solid green when AP mode is enabled and active. AP mode times out
© 2017 Enphase Energy Inc.
IQ Envoy Installation and Operation
AP Mode LED
AP Mode button
141-00039 Rev 01