enphase IQ Envoy Installation And Operation Manual page 31

View or Change Wi-Fi Settings
When the Envoy uses Wi-Fi to connect with Enlighten, select > to
view Wi-Fi configuration information. From here you view
Available Networks (WPS and AP), Update Country, Enable AP
Mode, and view Device information.
If you replace the broadband router at the installation site, you
need to update the connection information on the IQ Envoy. To
do this:
Select Connect Other Network.
•
Enter the new Wireless Network Name (ESSID) and
•
Security code.
If you need to disconnect the Envoy from a Wi-Fi network:
Select More Info.
•
Click Forget this Network.
•
31 © 2017 Enphase Energy Inc.
IQ Envoy Installation and Operation
141-00039 Rev 01