Reloading Panel Files
Overview
Once the Firmware has been upgraded and the battery has been replaced, the Touch Panel files that were
retrieved and backed up can be replaced on the panel. Generally, this process is simply a reversal of the process
described in the Retrieving Panel Files section on page 3.
At this point, it assumed that NetLinx Studio is already in communication with the NetLinx Master (see the
Connecting to a NetLinx Master Via TCP/IP section on page 3).
Reloading Panel Files
The following steps describe reloading the Panel Files to the Touch Panel after the Firmware upgrade / Battery
replacement process is complete.
1.
Select Tools > File Transfers to open the File Transfer dialog, and open the Send tab (FIG. 1).
FIG. 1
File Transfer dialog (Send tab)
2.
Click the Add command button to open the Select Files For File Transfer dialog, and click on the Other
tab (FIG. 2).
Battery Replacement & Firmware Upgrade - 5.2" Modero ViewPoint Touch Panels
Reloading Panel Files
25