Mvp-5150 Firmware Upgrade Paths; Mvp-5200I Firmware Versions; Mvp-5200I Firmware Upgrade Paths - AMX MVP-5200i Installation Manual
Battery replacement
& firmware upgrade
5.2" modero viewpoint touch panels
Hide thumbs
Also See for MVP-5200i:
- Operation/reference manual (202 pages) ,
- Datasheet (2 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Upgrading Panel Firmware
MVP-5150 Firmware Upgrade Paths
MVP-5200i Firmware Versions
MVP-5200i
Released
Firmware
Version
V2.60.38
V2.60.64
V2.65.13
V2.65.21
V2.66.17
V2.66.21
User settings (System Settings, Wireless Settings, etc.) are not affected by these firmware upgrades.
MVP-5200i Firmware Upgrade Paths
Important note regarding "SW5966-01_MVP5200i_v2_66_21-prep.kit":
This kit file does an automated double upgrade that reboots the panel in the middle of
the sequence.
The Installer needs to be patient and wait 15 – 20 minutes to complete after the
download.
If the Installer gets impatient and pulls power or initiates a hard reset, the upgrade
process will likely fail, requiring the unit to be returned to the factory for
reprogramming.
10
Upgrade Path #1 – No Loss of User Touch Panel Pages
Step 1
Install "SW5966-07_MVP_5150_v2.60.30prep.kit"
Step 2
Install "SW5966-07_MVP5150_v2.60.32.kit"
Step 3
Install "SW5966-07_MVP5150_v2_66_21.kit"
Estimated Time Required for Firmware Upgrade:
Upgrade Path #2 – No Loss of User Touch Panel Pages
Step 1
Install "SW5966-07_MVP5150_v2_66_21.kit"
Estimated Time Required for Firmware Upgrade:
Upgrade Path From
Comments
This Version
1
LR Release – requires a "prep" kit file to upgrade firmware
2
LR+ Release
2
Added battery fault detection
2
External power detection & charger enable/disable
3
Support for new battery pack
N/A
Added Battery Type field. This is current release.
Upgrade Path #1 –
User Touch Panel Pages Must Be Reloaded
Step 1
Install "SW5966-01-A-MVP5200i_PrepFor_v2.60.64.kit"
Step 2
Install "SW5966-01-A-MVP5200i_v2.60.64.kit"
Step 3
Install "SW5966-01_MVP5200i_v2_66_21-prep.kit"
See NOTE below.
Estimated Time Required for Firmware Upgrade:
Upgrade Path #2 –
User Touch Panel Pages Must Be Reloaded
Step 1
Install "SW5966-01_MVP5200i_v2_66_21-prep.kit"
See NOTE below.
Estimated Time Required for Firmware Upgrade:
Upgrade Path #3 – No Loss of User Touch Panel Pages
Step 1
Install "SW5966-01_MVP5200i_v2_66_21.kit"
See NOTE below.
Estimated Time Required for Firmware Upgrade:
Battery Replacement & Firmware Upgrade - 5.2" Modero ViewPoint Touch Panels
1 hour
15 minutes
1 hour
15 minutes
15 minutes
Advertisement
Table of Contents
