AMX MVP-5200i Installation Manual page 10

Retrieving Panel Files
2.
Click Communication Settings to access the Communication Settings dialog (FIG. 2).
FIG. 2 NetLinx Studio - Communication Settings dialog
3.
Click Edit Settings to open the TCP/IP Settings dialog (FIG. 3).
FIG. 3
NetLinx Studio - TCP/IP Settings dialog
If the desired IP Address has already been entered, then it will appear in the List of Addresses. In this
case, select the IP Address and click Select.
If the IP address is not present in the List of Addresses, then it needs to be added:
a.
Click New to open the New TCP/IP Setting dialog (FIG. 4).
FIG. 4 NetLinx Studio - New TCP/IP Setting dialog
b.
Enter the IP Address of the target NetLinx Master in the TCP/IP Address field
c.
Enter a friendly name for this connection (i.e. "NetLinx Master") in the Description field.
4
Select NetLinx Master as the Platform Selection.
Select TCP/IP as the Transport Connection Option.
Battery Replacement & Firmware Upgrade - 5.2" Modero ViewPoint Touch Panels
Click to open the
TCP/IP Settings
dialog
Click to open the New TCP/IP
Setting dialog, to manually
enter a new IP Address
Click to open the
Listen for Masters
dialog, to auto-detect
all Masters on the
LAN