AMX MVP-5200i Installation Manual page 33

FIG. 4
Enter Device Mapping Information dialog
If you do not already know the Device Number assignment for the Touch Panel, you
can get it from the panel's online Protected Setup page. See the Determining the
Device Mapping Information for the Touch Panel section on page 8 for details.
6.
Enter the Device, Port and System numbers for the target Touch Panel, and click OK to close the dialog
and add the File to the list at the bottom of the Select Files To Transfer dialog (FIG. 5).
FIG. 5 Select Files To Transfer dialog
7.
Click OK to close the Select Files For File Transfer dialog and return to the File Transfer dialog. The file
that you added should now appear in the Files To Send queue, in the Receive tab.
8.
In the File Transfer dialog, click the Send command button (FIG. 6).
Battery Replacement & Firmware Upgrade - 5.2" Modero ViewPoint Touch Panels
Reloading Panel Files
27