AMX MVP-5200i Installation Manual page 29

When reassembling the device, take care not to pinch or squeeze the connector
wiring or the battery. Do not force the back cover onto the device, as this can damage
the device.
4.
Insert the five screws and replace the rubber feet atop the two upper screws, using the replacement rubber
feet included in the Battery Pack Kit (FIG. 8).
Bottom foot
Back cover
FIG. 8 MVP-5100 back cover installation
5.
Replace the bottom rubber foot over the three lower screws, using the replacement large rubber foot
included in the Battery Pack Kit.
6.
Restart the device to confirm that the new battery is functioning correctly.
Battery Replacement & Firmware Upgrade - 5.2" Modero ViewPoint Touch Panels
Bottom screw
holes
Front of MVP-5100
Battery Removal and Replacement
Rubber feet
Upper screws
Bottom
screws
23