Other Network Settings
Configure the following items according to your network environment.
Configuring SNTP(P. 77)
Monitoring the Machine from the Device Management Systems(P. 78)
Configuring SNTP
Simple Network Time Protocol (SNTP) enables you to adjust the system clock by using the time server on the network.
If SNTP is used, the time server is checked at the specified intervals; therefore, the correct time can always be
maintained. The time is adjusted based on Coordinated Universal Time (UTC), so specify the time zone setting before
configuring SNTP (
Setting the Date/Time(P. 21) ). SNTP settings can be specified via the Remote UI.
●
The SNTP of the machine supports both NTP (version 3) and SNTP (versions 3 and 4) servers.
●
For more information about the basic operations to be performed when setting the machine from the
Remote UI, see
Setting Up Menu Options from Remote UI(P. 283) .
1
Start the Remote UI and log in to System Manager Mode.
UI(P. 275)
2
Click [Settings/Registration] on the Portal page.
3
Select [Network Settings]
4
Click [Edit].
5
Select the [Use SNTP] check box and specify the required settings.
[Use SNTP]
Select the check box to use SNTP for synchronization. If you do not want to use SNTP, clear the check box.
[NTP Server Name]
Setting Up
[SNTP Settings].
77
Starting Remote
Remote UI Screen(P. 276)
1648-01F