Canon imageCLASS LBP654Cdw User Manual page 341

<Drawer 1>
<Off>
<On>
*
<Drawer 2>
<Off>
<On>
Touch panel model
<Menu> <Adjustment/Maintenance>
Processing>
paper source to be set
Black and white LCD model
<Menu> <Adjustment/Maintenance>
Processing>
source <On>
● If you set to <On>, the printing speed may be slower or image quality may be affected.
<Env. Flap Closing Prevention>
If envelope flaps cling to the envelope bodies when printing, select <On>.
<Off>
<On>
<Menu> <Adjustment/Maintenance>
Processing>
( )
● If you set to <On>, toner may not be fixed sufficiently, resulting in faded printouts.
<Paper Wrinkle Correction>
Printouts may wrinkle depending on the paper to use. In this case, setting this item may solve the problem.
The improvement effect is stronger with <Mode 2> than with <Mode 1>.
<Off>
<Mode 1>
<Mode 2>
Setting Menu List
<Special Paper Processing>
<Apply> <Yes>
<Special Paper Processing>
<Special Paper Processing>
335
<Adjust Image Quality>
<Rough Surface Paper Mode>
<Adjust Image Quality>
<Rough Surface Paper Mode>
<Adjust Image Quality>
<Env. Flap Closing Prevention>
<Special
Select <On> in the
<Special
Select the paper
<Special
<On> <Yes>