Canon imageCLASS LBP654Cdw User Manual page 326

<Menu>
RFC2790>
<Use Dedicated Port>/<Dedicated Port Set.>
Enable or disable the dedicated port. The dedicated port is used when printing from the computer and when browsing
or specifying the machine settings over the network.
<Off>
<On>
<Menu>
<Off> or <On>
<Dedicated Port Authentication Method>
Specify whether to limit the authentication method specifically to the secure one when using the dedicated port. If
<Mode 2> is selected, the authentication method is limited specifically to the secure one.
<Mode 1>
<Mode 2>
<Menu>
<Mode 2>
● If <Mode 2> is selected, you cannot establish a connection from the device management software or driver
in some cases.
<Waiting Time for Connection at Startup>
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Wait Time for Connecting to a Network(P. 64)
0 to 300 (sec.)
Setting Menu List
<Preferences> <Network>
Select <Off> or <On>
<Preferences> <Network>
Restart the machine
<Preferences> <Network>
Restart the machine
<SNMP Settings>
Restart the machine
<Use Dedicated Port>/<Dedicated Port Set.>
<Dedicated Port Auth. Method>
320
<Format Host Resources MIB to
Select <Mode 1> or
Select
Setting a