Table of Contents
Advertisement
●
When the next screen is displayed, follow the instructions on the screen.
*
When you select the [Device Type], select [Canon Network Printing Device with P9100] under [Standard].
5
Click [Finish].
6
Click [Close].
Changing the port type or number
If the printing protocol (LPD or RAW) has been changed on the machine side (
Protocols and WSD Functions(P. 51) ) or the port number has been changed (
Numbers(P. 243) ), the corresponding settings on the computer must also be configured. This operation is
not needed for WSD ports.
1
Click [Configure Port].
2
Under [Protocol], select [Raw] or [LPR].
●
If you selected [Raw], change the [Port Number].
●
If you selected [LPR], enter "lp" in [Queue Name].
3
Click [OK].
4
Click [Close].
Setting Up
55
Configuring Printing
Changing Port
- Quick Links:
- Connecting to a Wireless Lan
Hide quick links:
Advertisement
Table of Contents
