Canon imageCLASS LBP654Cdw User Manual page 105

[Back] key
Press to return to the previous screen. If you press this key when specifying settings, for example, the
settings are not applied and the display returns to the previous screen.
Numeric keys ([0]-[9] keys)
Press to enter numbers and text.
[*] key
Press to switch the type of text that is entered.
[Data] indicator
Blinks while operations such as sending or printing are being performed. Lights up when there are
documents waiting to be processed.
[Error] indicator
Blinks or lights up when an error such as a paper jam occurs.
[Energy Saver] key
Press to put the machine into sleep mode. The key lights up green when the machine is in sleep mode. Press
the key again to exit sleep mode.
[Status Monitor] key
Press to check the printing status, to view the usage history, or to view the network settings such as the IP
address of the machine. You can also check the status of the machine, such as the remaining amount of
paper and the amount remaining in the toner cartridges, or whether any errors occurred.
Monitor> Screen of Black and White LCD Model(P. 111)
[ID] key
Press after entering the ID and PIN to log on when Department ID Management is enabled. After you finish
using the machine, press this key again to log off.
[Clear] key
Press to delete the entered numbers and text.
[Stop] key
Press to cancel printing and other operations.
[#] key
Press to enter symbols such as "@" or "/".
[ ] key
When specifying settings, press to return to the previous screen. When entering numbers, press to move the
cursor to the left.
Basic Operations
Entering Text on the Black and White LCD Model(P. 120)
Entering Sleep Mode(P. 163)
Logging in to the Machine(P. 123)
99
<Status