Table of Contents
Advertisement
1
Select the [Use Filter] check box and click the [Reject] or [Allow] radio button for the [Default Policy].
[Use Filter]
Select the check box to restrict communication. Clear the check box to disable the restriction.
[Default Policy]
Select the precondition to allow or reject other devices to communicate with the machine.
[Reject]
[Allow]
2
Specify address exceptions.
●
Enter the MAC address in the [Address to Register] text box and click [Add].
●
You do not need to delimit the address with hyphens or colons.
Check for entry errors
●
If MAC addresses are incorrectly entered, you may become unable to access the machine from the
Remote UI, in which case you need to set <MAC Address Filter> to <Off>.
Filter>(P. 323)
When [Reject] is selected for an outbound filter
●
Outgoing multicast and broadcast packets cannot be filtered.
Deleting a MAC address from exceptions
●
Select a MAC address and click [Delete].
Managing the Machine
Select to pass communication packets only when they are sent to or received from
devices whose MAC addresses are entered in [Exception Addresses].
Communications with other devices are prohibited.
Select to block communication packets when they are sent to or received from
devices whose MAC addresses are entered in [Exception Addresses].
Communications with other devices are permitted.
241
<MAC Address
- Quick Links:
- Connecting to a Wireless Lan
Hide quick links:
Advertisement
Table of Contents
