Canon imageCLASS LBP654Cdw User Manual page 253

7
Click [Edit].
8
Select the [Use TLS] check box and click [OK].
9
Restart the machine.
● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Using the operation panel
● You can also enable or disable TLS encrypted communication from <Menu> in the Home screen.
UI Settings>/<Use Remote UI>(P. 414)
Starting the Remote UI with TLS
● If you try to start the Remote UI when TLS is enabled, a security alert may be displayed regarding the
security certificate. In this case, check that the correct URL is entered in the address field, and then proceed
to display the Remote UI screen.
Using TLS to encrypt I-Fax reception
● If the POP3 server supports TLS, you can enable TLS for communication with the POP3 server (
Configuring the I-Fax RX Settings(P. 194) ). For more information about the POP3 server, contact your
Internet service provider or Network Administrator.
Limiting the TLS version
● Select [Allowed Versions] on the [TLS Settings] page of Remote UI, and specify the upper limit and lower
limit.
LINKS
Generating the Key and Certificate for Network Communication(P. 249)
Generating a Key and Certificate Signing Request (CSR)(P. 252)
Registering the Key and Certificate for Network Communication(P. 255)
Managing the Machine
Starting Remote UI(P. 275)
247
<Remote