CyberData 011186 Operation Manual page 44

Web Page Item
Note
Note
Note
Note
Note
Operations Guide
Table 2-7. Device Configuration Parameters (Continued)
You must click on the Save button and then the Reboot button for the changes to take
effect.
The SIP Volume, Multicast
Volume settings do not require a reboot for the changes to take effect.
The NTP Server setting needs to be restarted to spawn NTP or to change the server.
Syncing and changing the
for the changes to take effect.
None of the Relay Settings
The Disable HTTPS (NOT recommended)
effect.
931293D
Description
Click on the Test Microphone button to do a microphone
test. When the Test Microphone button is pressed, the
following occurs:
1. The device will immediately start recording 3 seconds of
audio.
2. The device will beep (indicating the end of recording).
3. The device will play back the recorded audio.
Click on the Test Relay button to do a relay test.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description
of some of the web page items. First click on the Toggle
Help button, and you will see a question mark (
next to some of the web page items. Move the mouse
pointer to hover over a question mark to see a short
description of a specific web page item.
Volume, Ring Volume,
Time update period (in hours)
require a reboot for the changes to take effect.
setting requires a reboot for the changes to take
Sensor Volume, and Push to Talk
setting does not require a reboot
CyberData Corporation
37
) appear