Connections To Arm/Disarm The System; Connections And Operation Via Can Bus Line; Pag; Connections To Locking Motors - Gemini 932IT Installation And User Manual

Hide thumbs Also See for 932IT:

Installation and user manual (9 pages)

Table Of Contents

Table of Contents

6.0

The

932IT alarm system can operate in various modes according to the vehicle on which it is installed

and the available connections.

The alarm system can be managed via the vehicle CAN BUS line and operate in combination with the

CAN signals, with the turn indicators flashes and/or the door lock motor unit. The system

automatically manages the different arming/disarming signals.

Select one of the arming modes and connections indicated hereunder (r

installation instructions available in the private area of our website)

Arming via CAN BUS.

Arming via door lock motor unit.

Arming via turn indicators flashes.

Arming via turn indicators flashes and locking motors

rming via turn indicators flashes, locking motors and

6.1 -

System arming/disarming and alarms are managed via CAN therefore only connect the alarm system

CAN wires to the vehicle CAN lines (

website:

www.gemini-alarm.com).

System arming/disarming connections must be made to the vehicle door lock motor unit (invert polarity).

If the turn indicators lock/unlock flashes are identical, also connect the door lock motors.

If the turn indicators flash when unlocking with the car mechanical key, do not make this

To arm/disarm the system, connect the WHITE-ORANGE wire to one of the turn indicator wires.

This type of connection allows the system to operate via the CAN line in combination with the turn

indicators or the door lock motor unit or both.

or the door lock motor unit or both.

The system automatically manages the different lock/unlock signals according to the selected

configuration and connections.

PAGE 10 - INSTALLER MANUAL