Gemini 933MHW User Manual
Gemini 933MHW User Manual

Gemini 933MHW User Manual

Alarm kit

Advertisement

 
 
 
 
 
 
     
UK
 

1.0 - INTRODUCTORY NOTE

2.0 - REMOTE CONTROL 738W DESCRIPTION AND BATTERY REPLACEMENT

3.1 - Complete system arming
3.2 - System arming with sensors exclusion
3.3 - Passive arming
3.4 - Arming delay
3.5 - System armed
3.6 - Alarm, inhibit time between alarms and alarm cycles
3.7 - System disarming
3.8 - Alarm memory
4.0 - LEARNING & DELETING DEVICES
4.1 - Learning new devices
4.2 - Deleting programmed devices
Dear customer, thank you for choosing this GEMINI product designed and manufactured in Italy specifically for recreational vehicles.This new generation CAN
BUS alarm system has been implemented with a 2.45GHz transceiver and ZigBee wireless technology with anti-jamming reliability.
Please read the present manual carefully to familiarize yourself fully with the operation of your alarm system and do keep it for future reference.
2.0 - REMOTE CONTROL 738W DESCRIPTION AND BATTERY REPLACEMENT
If the right connections have been made, the vehicle doors will lock/unlock when pressing the arming/disarming buttons.
TOTAL SYSTEM
(and door lock)
PARTIAL ARMING
(door lock & sensor exclusion)
If the LED light blinks 3 times when pressing any button, the battery is weak and must be replaced as follows:
ALARM KIT 933MHW
1.0 - INTRODUCTORY NOTE
BUTTON 1:
ARMING
BUTTON 3:
ATTENTION: Risk of explosion if battery is replaced by an incorrect type.
Discard used batteries properly in special dedicated containers.
Designed and manufactured by GEMINI TECHNOLOGIES srl ‐  Via L. Galvani, 12 – 21020 Bodio Lomnago (VA) – Italy 
Tel. +39 0332 943211 – Fax +39 0332 948080 – www.gemini‐alarm.com 
SYSTEM DISARMING
(and door unlock)
Use only 23AE batteries.
ISO 9001 CERTIFIED COMPANY 
BUTTON 2:
AC2955 Rev.00  01/2018
1/4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 933MHW and is the answer not in the manual?

Questions and answers

Summary of Contents for Gemini 933MHW

  • Page 1 1.0 - INTRODUCTORY NOTE Dear customer, thank you for choosing this GEMINI product designed and manufactured in Italy specifically for recreational vehicles.This new generation CAN BUS alarm system has been implemented with a 2.45GHz transceiver and ZigBee wireless technology with anti-jamming reliability.
  • Page 2 3.1 COMPLETE SYSTEM ARMING Press the lock button on the vehicle remote control or button “1” on the Gemini remote control (P/N 738W); system arming is confirmed by a siren chirp and a flash of the turn indicators (if optical/acoustic signals are enabled). The system has a 30 sec. arming delay during which the LED is ON steady.
  • Page 3 • The LED will switch OFF when the devices have been deleted. • Turn ignition key “OFF”. • A long low-pitched chirp and a flash of the turn indicators will confirm the end of the procedure. Designed and manufactured by GEMINI TECHNOLOGIES srl ‐  Via L. Galvani, 12 – 21020 Bodio Lomnago (VA) – Italy  AC2955 Rev.00  01/2018 Tel. +39 0332 943211 – Fax +39 0332 948080 – www.gemini‐alarm.com  3/4...
  • Page 4 6.0 - WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT DIRECTIVE (WEEE) The present device does not fall within the scope of Directive 2002/96EC on Waste Electrical and Electronic Equipment (WEEE) as specified in art. 2.1 of L. D. No. 151 of 25/07/2005. Designed and manufactured by GEMINI TECHNOLOGIES srl ‐  Via L. Galvani, 12 – 21020 Bodio Lomnago (VA) – Italy  AC2955 Rev.00  01/2018 Tel. +39 0332 943211 – Fax +39 0332 948080 – www.gemini‐alarm.com ...

Table of Contents