Table of Contents
Advertisement
Dear Customer, thank you for choosing a Gemini alarm system.
This product, supplied with 1 touch key to emergency override the system and exclude the sensors,
can also me managed by the following Gemini optional devices: an RFID transponder (908) and/or a 2-
button remote control (7208E) and/or a 4-button remote control 848/ALG.
The transponder is particularly useful because it recognizes the driver and automatically disables the
engine immobilizer.
Please read the present manual carefully to familiarize yourself fully with the operation of your alarm
system and pay special attention to the following signs:
.
This sign indicates that the system will operate according to the connections and the
!
selected configuration or it simply provides helpuf information on installing the alarm
Press the vehicle original remote control lock button or button "1" on a Gemini remote control. If the
optical/acoustic signals have been enabled, arming will be confirmed by 1 flash of the turn indicators
and 1 Beep.
The system has a 30 sec. arming delay signaled by the LED turned ON steady.
When the system is fully armed, after the arming delay, the LED will blink according to the associated
devices (ex. if the alarm system works with 1 touch key and 1 remote control, the flashing sequence,
while the alarm is armed, will be the following: 2 quick flashes in a row followed by a pause.).
The system can be armed without enabling the internal volumetric protection (ultrasonic sensors) and
optional wireless PIR sensors
To arm the system and exclude the sensors proceed as follows:
• Touch the key to its receptacle; the LED will give off a quick flash.
• Close all doors and press the original remote control lock button
7208E.
NB:
With remote control 848/ALG, simply press button "3" without touching the override key to its
receptacle.
• Arming will be confirmed by optical/acoustic signals (if enabled).
1.0 - INTRODUCTORY NOTE
This sign highlights useful information.
USER GUIDE
2.0 - OPERATING INSTRUCTIONS
2.1 - SYSTEM TOTAL ARMING
2.2 - SYSTEM ARMING WITH SENSOR EXCLUSION
.
Sensor exclusion is bound to each single arming cycle.
For the user.
For the installer.
system.
or button "1" on remote control
PAGE 03
Hide quick links:
Advertisement
Table of Contents
