Table of Contents
Advertisement
5.
Press Ctrl-A to save these settings and move to the RAID configuration
screen.
To make Management Port settings manually:
1.
Press the arrow keys to highlight DHCP.
2.
Press the spacebar to toggle to Disabled.
3.
Press the arrow keys to highlight IP Address.
4.
Press the backspace key to erase the current IP Address.
5.
Type the new IP Address.
6.
Follow the same procedure to specify the Subnet Mask, Gateway IP
Address and DNS Server IP Address.
If you do not have a DNS server, skip the DNS Server IP address.
7.
Press Ctrl-A to save these settings.
Exit the CLU
1.
Highlight Skip the Step and Finish and press Enter.
2.
Highlight Return to CLI and press Enter.
This completes the Management port setup. Go to "Step 9: VTrak Setup with
Embedded WebPAM" on page 25.
CLU: iSCSI Models (M500i, M300i, M200i)
1.
At the admin@cli prompt, type menu and press Enter.
The CLU main menu appears.
2.
With Quick Setup highlighted, press Enter.
The first Quick Setup screen enables you to make Date and Time settings.
Step 7: Set IP Address with CLI or CLU
19
Hide quick links:
Advertisement
Table of Contents
