Motoweld Type: Operation Of Customize Window - YASKAWA DX200 Operator's Manual

Weldcom Function: Arc
Welding Digital I/F
3.5
3 Operation of Welding Condition File Edit Window

3.5 MOTOWELD Type: Operation of Customize Window

MOTOWELD Type: Operation of Customize Window
1. At the top window, select {Customize}.
– Change the parameter of the weld user file selected.
2. Select {Start/End}.
– Change the parameter. For details on the parameters, see the user
manual of the welding power source.
3. Select {Short} or {Pulse}.
– Change the parameter. For details on the parameters, see the user
manual of the welding power source.
【Case : Selected weld type is "Short".】
3-4
169861-1CD
HW1482771
36 of 75