Supplement; Technical Data - Vega VEGAPULS 63 Operating Instructions Manual

10 Supplement

10 Supplement

10.1 Technical data

General data
Materials, wetted parts
Ʋ Process fitting
Ʋ Antenna encapsulated or hygienically
encapsulated
Ʋ Process seal with hygienically encap-
sulated antenna
Materials, non-wetted parts
Ʋ Housing
Ʋ Seal between housing and housing lid Silicone SI 850 R, NBR silicone-free
Ʋ Inspection window in housing cover
for PLICSCOM
Ʋ Ground terminal
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Torque of the flange screws (min.)
Weight
Ʋ Clamp, slotted nut, depending on size
and housing material
Ʋ Flanges, depending on flange size
and housing material
Torques
Required torque of the flange screws
Recommended torque for tightening the
flange screws
Max. torque for NPT cable glands and Conduit tubes
Ʋ Plastic housing
Ʋ Aluminium/Stainless steel housing
Output variable
Output
Ʋ Signal
Ʋ Physical layer
Cycle time
Ʋ Damping (63 % of the input variable)
Ʋ Met NAMUR recommendation
50
316L
PTFE (TFM 1600), PFA plated, PVDF
FKM, EPDM
Plastic PBT (polyester), Alu die-casting, powder-coated,
316L
Polycarbonate (UL-746-C listed)
316Ti/316L
PA, stainless steel, brass
NBR
PA
60 Nm (44.25 lbf ft)
3.5 ... 6.0 kg (7.716 ... 13.22 lbs)
4.2 ... 15.4 kg (9.259 ... 33.95 lbs)
60 Nm (44.25 lbf ft)
60 ... 100 Nm (44.25 ... 73.76 lbf ft)
10 Nm (7.376 lbf ft)
50 Nm (36.88 lbf ft)
digital output signal, Foundation Fieldbus protocol
according to IEC 61158-2
min. 1 s (dependent on the parameter setting)
0 ... 999 s, adjustable
NE 43
VEGAPULS 63 • Foundation Fieldbus