Table of Contents
Advertisement
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Remove the hoop.
> Touch the icon «Move the module for sewing mode».
P
> Touch the icon «Home».
> Touch the icon «Sewing mode».
Grid on/off
When the center of the hoop and the grid are displayed, the embroidery motif can be positioned more
exactly.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Grid on/off» to display the center of the hoop on the display.
> Touch the icon «Grid on/off» again to display the grid.
> Touch the icon «Grid on/off» again so that the center of the hoop and the grid disappear.
Locating the center of the embroidery motif
The embroidery hoop is positioned so that the needle is exactly above the center of the embroidery motif or
the motif begin.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Center of the embroidery motif» to position the hoop so that the needle is placed
exactly over the center of the embroidery motif.
> Touch the icon «Center of the embroidery motif» again to position the hoop so that the needle is placed
exactly over the motif start.
Virtual positioning of the embroidery hoop
The embroidery hoop is automatically moved to the new position as soon as the embroidery motif is
repositioned. Therefore the icon «Virtual positioning» is activated automatically and outlined in yellow when
an embroidery hoop is attached.
Prerequisite:
• The hoop is attached.
> Touch the icon «Embroidery hoop display/Embroidery hoop selection».
> Touch the icon «Virtual positioning» to deactivate the automatic movement of the hoop when having
repositioned the embroidery motif.
> Touch the icon «Virtual positioning» again to activate the automatic movement of the hoop when having
repositioned the embroidery motif.
1017815.0.04_2016-05_Manual_B765_EN
Embroidering preparation
147
Advertisement
Table of Contents
