Programming The Button «Thread Cutter; Adjusting The Presser Foot Position With Needle Stop Down - Bernina 765 SE Manual

Setup Program
> Touch the icon «Secure» to deactivate the automatic securing.
> Touch the icon «Secure» again to activate the automatic securing.
Programming the button «Thread cutter»
The automatic securing can be programed before the thread cut takes place.
> Touch the icon «Setup Program».
> Touch the icon «Sewing settings».
> Touch the icon «Programm buttons and icons».
> Touch the icon «Program the button Thread cutter».
> Touch the icon «Secure» to sew 4 securing stitches in place.
> Touch the icon «Alter the number of securing stitches» to program the securing stitches in close
succession.
> Touch the icons «-» or «+» to program the number of securing stitches.
> Touch the icon «Securing stitches in place» to program 4 securing stitches in place.
> Touch the icon «Secure» to deactivate the automatic securing.
> Touch the icon «Secure» again to activate the automatic securing.

Adjusting the presser foot position with needle stop down

With lowered needle, 3 different presser foot position can be selected: the presser foot lowered, the presser
foot is raised to hovering position and the presser foot is raised to its maximum height.
> Touch the icon «Setup Program».
> Touch the icon «Sewing settings».
> Touch the icon «Programming buttons and icons».
> Touch the icon «Adjusting the presser foot position with needle stop down».
56
1017815.0.04_2016-05_Manual_B765_EN