Table of Contents
Advertisement
Embroidering preparation
> Select the needle size (2) of the inserted needle.
1
2
Attaching the stitch plate
The stitch plate (CutWork/Straight, supplied accessory) has a small needle hole in the needle insertion area.
The thread is pulled in and knotted optimally which results in an optimized stitching result.
> Push the button «Feed dog up/down» to lower the feed dog.
> Switch the machine off and disconnect it from the power supply system.
> Remove the needle.
> Remove the presser foot.
> Press the stitch plate down at the mark back right until it flips up.
> Remove the stitch plate.
> Place the openings of the stitch plate (CutWork/Straight, supplied accessory) above the corresponding
guide pins and press down until it clicks into place.
141
1017815.0.04_2016-05_Manual_B765_EN
Advertisement
Table of Contents
