Determining The Buttonhole Length; Using The Stitch Counter Function - Bernina 765 SE Manual

Buttonholes

9.8 Determining the buttonhole length

The button can be placed in the yellow circle in the left section of the display. The yellow circle can be
enlarged or downsized by turning the «Upper/Lower Mulitfunction knobs» and the diameter of the
button can be determined in this way.
Additionally to the diameter of the button, 2 mm are added automatically for the buttonhole length. If the
diameter of the button is 14 mm, the buttonhole length is calculated 16 mm.
> Touch the icon «Buttonholes».
> Select the buttonhole.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the buttonhole length».
16.0
> Turn the «Upper Multifunction knob» or the «Lower Multifunction knob» to adjust the buttonhole

9.9 Using the stitch counter function

The stitch counter function is suitable for all types of buttonholes. The left buttonhole bead is sewn forward,
the right buttonhole bead is sewn in reverse. If alterations of the balance are made, the stitch counter
function has to be saved for every buttonhole separately.
Prerequisite:
• The Buttonhole foot No. 3C (Optional accessory) is attached.
> Touch the icon «Buttonholes».
> Select the buttonhole.
> Touch the icon «i»-Dialog.
> Touch the icon «Program the length with stitch counter».
> Sew the desired buttonhole length.
123
REC
> Stop the machine.
> Press the button «Quick reverse» so that the machine sews the lower bartack and the second bead in
> Stop the machine at the height of the first stitch.
> Press the button «Quick reserve» again so that the machine sews the upper bartack and the securing
116
length.
reverse.
stitches.
– The length of the buttonhole remains saved and every subsequent buttonhole is sewn identically until
the machine is switched off.
1017815.0.04_2016-05_Manual_B765_EN