Table of Contents
Advertisement
> Select the desired presser foot position.
Programming the button «Quick reverse»
It can be chosen either «Quick reverse permanent» or «Backstepping».
> Touch the icon «Setup Program».
> Touch the icon «Sewing settings».
> Touch the icon «Program buttons and icons».
> Touch the icon «Program the button Quick reverse».
> Touch the icon «Backstep» to activate the backstepping.
> Touch the icon «Quick reverse permanent» to activate the permanent reverse sewing.
Programming the foot control
When the icon «Needle up/down» is activated, the needle is raised or lowered via a back kick on the foot
control. Alternatively, the presser foot can be positioned, the thread can be cut and the automatic securing
can be programmed.
> Touch the icon «Setup Program».
> Touch the icon «Sewing settings».
> Touch the icon «Program the foot control».
– The icon «Needle up/down» is activated by default.
– The back kick on the foot control raises or lowers the needle.
> Touch the icon «Program the back kick» to program the back kick.
> Touch the icon «Secure» to sew 4 securing stitches in place.
1017815.0.04_2016-05_Manual_B765_EN
Setup Program
57
Advertisement
Table of Contents
