Subaru 2001 FORESTER Service Manual page 56

¼ RHD model
1) Pull up parking brake lever.
2) Disconnect battery ground terminal from bat-
tery.
3) Disconnect accelerator cable from throttle body.
CAUTION:
Be careful not to kink accelerator cable.
4) Remove instrument panel lower cover from
instrument panel.
5) Remove clevis pin which secures brake pedal
to brake booster operating rod. Also disconnect
electrical connectors (for stop light switch, etc.).
6) Disconnect accelerator cable from accelerator
pedal lever.
(1) Slot type screwdriver
7) Remove the casing cap out of the toe board by
turning it clockwise.
(1) Accelerator cable
(2) Toe board hole
(3) Casing cap
8) Pull out the cable from the toe board hole.
9) Disconnect stop light switch connector.
BRAKE PEDAL
10) Remove nuts and bolts which secure pedal
bracket.
(1)
S4M0482A
(2)
B4M0156B
BR-55
Accelerator pedal
Brake pedal
Brake
B4M0157B