Front Disc Brake Assembly - Subaru 2001 FORESTER Service Manual

4. Front Disc Brake Assembly

S405176
A: REMOVAL
S405176A18
1) Loosen wheel nuts, jack-up vehicle, support it
with safety stands, and remove wheel.
2) Remove union bolt and disconnect brake hose
from caliper body assembly.
3) Remove bolt securing lock pin to caliper body.
4) Raise caliper body and move it toward vehicle
center to separate it from support.
5) Remove support from housing.
NOTE:
Remove support only when replacing it or the rotor.
It need not be removed when servicing caliper
body assembly.
FRONT DISC BRAKE ASSEMBLY
B4M1844
B4M1845
B4M1192
BR-23
6) Remove disc rotor from hub.
NOTE:
If disc rotor seizes up within hub, drive disc rotor
out by installing an 8-mm bolt in holes B on the
rotor.
7) Clean mud and foreign particles from caliper
body assembly and support.
Brake
G4M0365