Initialization; Parameter Initialization; General Function Initialization - AND AD-4401A Instruction Manual

21. INITIALIZATION

21.1. Parameter Initialization

Power ON

21.2. General Function Initialization

Power ON
While holding the SETPOINT key, turn the AD-4401A
ON.
With the display shown to the left, press the ENTER
key.
With the display shown to the left, hold the ENTER
key for three seconds or more to initialize the
parameters below.
Zero setting value, tare value, status in the main
display, normal mode/OFF mode status, total
weight, number of accumulations, setpoint
values, normal /loss-in-weight batching status
While holding the SETPOINT key, turn the AD-4401A
ON.
With the display shown to the left, press the
NET/GROSS key.
With the display shown to the left, press the ENTER
key.
With the display shown to the left, hold the ENTER
key for three seconds or more to initialize the
parameters described in 21.1. and general
functions.
Page 77 AD-4401A