AND AD-4401A Instruction Manual page 69

CALF-
10 Tare and zero setting at unstable weight
11 Tare at negative gross value
Standard serial output, when the weight value
12
is overloaded or unstable.
BCD, RS-422/485, RS-232C output, when the
13
weight value is overloaded or unstable.
14 Weighing mode
15 Load cell signal voltage at zero calibration
(Load cell signal voltage at span calibration 
CALF-15)  CALF-17 / Calibration weight value
16
at span calibration
17 Maximum capacity at span calibration
Symbol used for header 2 of standard serial
18
output
Symbol used for header 2 of RS-232C or
19
RS-422/485
Automatic zero setting upon power-on
20 Zero setting range is ±10% of the maximum
capacity.
21 Zero clear
Item
Page 67
Setting Value
0: Disable
1: Enable
0: Disable
1: Enable
0: Disable
1: Enable
0: Disable
1: Enable
1: Simple comparison
normal batching
2: Simple comparison loss-
in-weight batching
3: Normal batching
4: Loss-in-weight batching
5: Check weighing 1
6: Check weighing 2
7: Check weighing 3
8: Check weighing 4
0.000000 to 2.200000
0.000000 to 3.200000
0 to 999999
1: GS/NT/TR
2: G/N/T
1: GS/NT/TR
2: G/N/T
0: Disable
1: Enable
0: Disable
1: Enable
Default
1
1
1
1
3
0.000000
2.000000
20000
1
1
0
1
AD-4401A