Setpoint Values List - AND AD-4401A Instruction Manual

17.2. Setpoint Values List

Setpoints available for setting depend on the calibration function weighing mode (CALF-14).
When the minimum division (CALF-03) is 10 d or more, the setpoint will be ten times the setting value.
Weighing mode: Normal batching / Simple comparison normal batching
Status display
Blinking FINAL
Blinking F.FALL
Blinking PRELIM
Blinking OP.PLM
Blinking OVER
Blinking UNDER
Blinking Z.BAND
Weighing mode: Loss-in-weight batching / Simple comparison loss-in-weight batching
Attach the accessory status label on the lower status display.
Status display
Blinking FINAL
Blinking F.FALL
Blinking PRELIM
Blinking FULL
Blinking OVER
Blinking UNDER
Blinking Z.BAND
Weighing mode: Check weighing 1/2/3/4
Attach the accessory status label on the lower status display.
Status display
Blinking Z.BAND
Blinking Lo-Lo
Blinking Lo
Blinking Go
Blinking Hi
Blinking Hi-Hi
Item
Final weight
Free fall
Preliminary
Optional preliminary
Overweight
Underweight
Near-zero
Item
Final weight
Free fall
Preliminary
Full
Overweight
Underweight
Near-zero
Item
Near-zero
Lo-Lo
Lo
Go
Hi
Hi-Hi
Page 63
Setting value
-999999 to 9999999
-999999 to 9999999
0: Not used
-999999 to 9999999
Setting value
-999999 to 9999999
-999999 to 9999999
0: Not used
-999999 to 9999999
Setting value
-999999 to 9999999
AD-4401A