When using GT15 or GT11
1.
2.
3.
1.
After powering up the GOT, touch [Main menu]
2.
The [Communication Settings] appears.
3.
Verify that the communication driver name to
be used is displayed in the box for the
communication interface to be used.
4.
When the communication driver name is not
displayed normally, carry out the following
procedure again.
1. PREPARATORY PROCEDURES FOR MONITORING
1.5 Verifying GOT Recognizes Connected Equipment
[Communication setting] from the Utility.
1.1Setting the Communication Interface
1
2
1 - 29