Mitsubishi GOT1000 Series Connection Manual page 31

Setting item
The following describes the setting items for the standard I/F setting and extension I/F setting.
Item
Standard I/F setting
CH No.
I/F
Driver
Detail Setting
Extension I/F setting
CH No.
Driver
Detail Setting
Set channel No. and drivers to the GOT standard interfaces.
GT16: Standard I/F-1, Standard I/F-2, Standard I/F-3, Standard I/F-4
GT15, GT1030, GT1020: Standard I/F-1, Standard I/F-2
GT11, GT105 , GT104 : Standard I/F-1, Standard I/F-2, Standard I/F-3
Set the CH No. according to the intended purpose.
The number of channels differs depending on the GOT to be used.
0: Not used
1 to 4: Used for connecting a controller of channel No. 1 to 4 set in Setting connected equipment (Channel
setting)
8: Used for barcode reader connection, RFID connection, PC remote operation connection, or fingerprint
authentication device connection
9: Used for connecting Host (Personal computer)
*: Used for gateway function, MES interface function, and Ethernet download
Multi: Used for Ethernet multiple connection
The communication type of the GOT standard interface is displayed.
Set the driver for the device to be connected.
None Host (Personal computer)
Make settings for the transmission speed and data length of the communication driver.
Refer to each chapter of the equipment to be connected to the GOT.
Set the communication unit attached to the extension interface of the GOT.
Set the CH No. according to the intended purpose.
The number of channels differs depending on the GOT to be used.
0: Not used
1 to 4: Used for connecting a controller of channel No. 1 to 4 set in Setting connected equipment (Channel
setting)
5 to 7: Used for barcode reader connection, RFID connection, and PC remote operation connection
* : For the gateway function, MES interface function, Ethernet download, report function,
hard copy (For printer output), video/RGB input, RGB output, multimedia function,
CF card unit, CF card extension unit, sound output, and external I/O or operation panel
Set the driver for the device to be connected.
None Each driver for connected devices
Make settings for the transmission speed and data length of the communication driver.
Refer to each chapter of the equipment to be connected to the GOT.
1. PREPARATORY PROCEDURES FOR MONITORING
Description
Each communication driver for connected devices
1.1 Setting the Communication Interface
1
2
1 - 9