Terminating Resistors Of Got - Mitsubishi GOT1000 Series Connection Manual

1.4.3

Terminating resistors of GOT

The following shows the terminating resistor specifications on the GOT side.
When setting the terminating resistor in each connection type, refer to the following.
RS-422/485 communication unit
Set the terminating resistor using the terminating
resistor setting switch.
Switch No.
Terminating
*1
resistor
1
Enable ON
Disable OFF
*1 The default setting is "Disable".
• For RS-422/485 communication unit
Terminating resistor setting switch
Rear view of RS-422/485 communication unit.
GT16
Set the terminating resistor using the terminating
resistor setting switch.
Switch No.
Terminating
*1
resistor
1
Enable ON
Disable OFF
*1 The default setting is "Disable".
• For GT1685M-S
Terminating resistor setting switch
(inside the cover)
1 - 26
1. PREPARATORY PROCEDURES FOR MONITORING
1.4 Connection Cables for the Respective Connection
SW1
2
ON
OFF
SW1
ON
SW1
2
ON
OFF
GT11
Set the terminating resistor using the terminating
resistor setting switch.
Terminating resistor selector switch
GT105
Set the terminating resistor using the terminating
resistor setting switch.
Terminating resistor selector switch