Mitsubishi GOT1000 Series Connection Manual page 45

RS-422 interface
Use the following as the RS-422 interface and the RS-422/485 communication unit connector on the GOT.
For the GOT side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector model
GOT
9-pin D-sub (female)
RS-422 conversion unit M2.6 millimeter screw
fixed type
*1
14-pin (female)
GT16
GT115 -Q
9-pin D-sub (female)
M2.6 millimeter screw
GT105 -Q
fixed type
GT104 -Q
GT1030, GT1020
9-pin terminal block
GT15-RS4-9S 9-pin D-sub (female)
M2.6 millimeter screw
GT01-RS4-M
fixed type
*1 When connecting to the RS-422/485 interface, use HDR-E14MAG1+ as a cable connector.
To use HDR-E14MAG1+, a dedicated pressure welding tool is required.
For details on the connector and pressure welding tool, contact Honda Tsushin Kogyo Co., Ltd..
*2 The terminal block (MC1.5/9-ST-3.5 or corresponding product) of the cable side is packed together with the GT1030, GT1020.
(2) Connector pin arrangement
GT16
GOT main part connector
see from the front
8 14
1
14-pin (female)
Connector type Connector model
17LE-13090-27(D2AC)
HDR-EC14LFDT1-SLE+
17LE-13090-27(D3AC)
*2
MC1.5/9-G-3.5BK
17LE-13090-27(D3AC)
GT15, GT11, GT105 , GT104 ,
GT01-RS4-M
GOT main part connector
see from the front
5
7
9
9-pin D-sub (female)
1. PREPARATORY PROCEDURES FOR MONITORING
1.4 Connection Cables for the Respective Connection
Manufacturer
DDK Ltd.
Honda Tsushin Kogyo Co., Ltd.
DDK Ltd.
PHOENIX CONTACT Inc
DDK Ltd.
GT1030, GT1020
See from the back of a
GOT main part
1
6
9-pin terminal block
1
2
1 - 23