Mitsubishi GOT1000 Series Connection Manual page 52

For GT10
1 - 30
1. PREPARATORY PROCEDURES FOR MONITORING
1.5 Verifying GOT Recognizes Connected Equipment
1.
2.
3. 4.
1.
After powering up the GOT, touch [Main Menu]
[Comm. Setting] from the Utility.
2.
Touch [Standard I/F] on [Comm. Setting].
3.
The [Standard I/F] appears.
4.
Verify that the communication driver name to
be used is displayed in the box for the
communication interface to be used.
5.
When the communication driver name is not
displayed normally, carry out the following
procedure again.
1.1Setting the Communication Interface