Changing The Ip Address; Novabackup - Buffalo linkstation 500 User Manual

Changing the IP Address

1
Click the
2
Hold down the control key, select your LinkStation, and choose Configure - IP Address.
3
Uncheck "Use DHCP", enter the desired settings and the administrator password, then click Apply.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize settings with the function button on the LinkStation.
• Local loopback address: 127.0.0.1, 255.255.255.0
• Network address: 0.0.0.0, 255.255.255.0
• Broadcast address: 255.255.255.255, 255.255.255.0
• The IP address range from 224.0.0.0 to 255.255.255.255

NovaBACKUP

NovaBACKUP is a Windows utility that lets you back up the data on your computer or LinkStations.
The software is available at http://d.buffalo.jp/LS500/. To download the installer, you need the serial number of your
LinkStation. The serial number is printed on the label at the back of the unit.
icon in the Dock to start NAS Navigator2.
121