Table of Contents
Advertisement
Chapter 3 Configuration
Accessing the Web-based Configuration Interface
(Mac OS X)
To access the configuration interface of the AirStation from a Mac, the IP address of the AirStation
is required. If you do not know the IP address, use the procedure below to access the configuration
interface.
Note: If you do not know the IP address of the AirStation, reset the AirStation. All settings will be changed to their
default values.
1
Click [Apple menu] > [System Preferences...].
2
Click [Network].
3
Click [Ethernet].
4
Select [Manually] in the Configure IPv4 field.
Note: Make a note of the current IP address.
5
Set the IP address of the Mac to be on the same subnet as the AirStation.
The first three numbers in the IP address should be the same and the fourth different. For
example, if the IP address of the AirStation is 1.1.1.1, you could set the IP address of the Mac
to 1.1.1.2. Click [Apply].
6
Launch your web browser, enter the IP address of the AirStation in the address field, and
press the Enter key.
When a screen appears for entering the name and password, enter "admin" in the username
field and "password" in the password field, then click [OK].
7
When the settings for the AirStation are complete, return the IP address of the Mac to its
original setting that was noted in step 4.
- 19 -
Hide quick links:
Advertisement
Table of Contents
