Updating The Firmware; Updating Manually; Updating Automatically - Buffalo TeraStation 5000 User Manual

4
Click OK.
Under the selected shared folder, a folder named "system_log" will now contain the logs.

Updating the Firmware

If a new firmware is available, a message is displayed when the TeraStation boots. You can update the firmware by
the following ways:
Notes:
• Updating version 2.40 or earlier firmware to 2.60 will overwrite your current guest account and user accounts
email address settings. The guest account will be enabled and all user accounts' email addresses will be blank.
Reconfigure your desired guest and user account settings after this update.
• If all drives and RAID arrays on the TeraStation have LVM enabled but no LVM volumes have been created, you
will not able to update the firmware from Settings.
• Settings is not available while the firmware is updating. Don't try to access Settings from another computer
until the update is complete.

Updating Manually

1
In Settings, click Management.
2
Choose Update.
3
Click Install Update.
You can also download the latest firmware from www.buffalotech.com.

Updating Automatically

1
In Settings, click Management.
2
Click to the right of "Update".
3
Click Update Settings.
151