Tcp/Ip Settings (Windows 7) - Buffalo AirStation WLI-H4-D1300 User Manual

Chapter 4 TroubleShooting

TCP/IP Settings (Windows 7)

To configure TCP/IP in Windows 7, follow the procedure below.
1
Click [Start] > [Control Panel] > [Network and Internet].
2
Click [Network and Sharing Center].
3
Click [Change Adapter Settings] on the left side menu.
4
Right-click on [Local Area Connection], then click [Properties].
5
If the User Account Control screen opens, click [Yes] or [Continue].
6
Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
7
To have DHCP set your IP address settings automatically, check [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each setting. Examples:
If your AirStation's IP address is 1.1.1.1,
IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
8
Click [OK].
1.1.1.2
255.255.255.0
blank
blank
blank
- 45 -