Specific Tooling - PIAGGIO MP3 500 i.e. SPORT Service Station Manual

MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
Engine
- Remove the oil guards using the special tool.

Specific tooling

020431Y Valve oil seal extractor
- Remove the spring supports.
N.B.
BLOW THE SEATS WITH COMPRESSED AIR TO FACILI-
TATE THE SPRING SUPPORT REMOVAL.
Removing the cylinder - piston assy.
- Remove the timing chain.
- Loosen the fastening screw and remove the
spacer and the tightening sliding block.
N.B.
IT IS ADVISABLE TO MARK THE CHAIN IN ORDER TO EN-
SURE THAT THE INITIAL DIRECTION OF ROTATION IS
MAINTAINED.
- Extract the cylinder with the relevant gasket and
the centring dowel.
N.B.
THE SECOND CENTRING IS ENSURED BY A PIN SET INTO
THE CYLINDER.
CAUTION
TO AVOID DAMAGING THE PISTON, KEEP IT FIRM WHILE
REMOVING THE CYLINDER.
ENG - 196