PIAGGIO MP3 500 i.e. SPORT Service Station Manual page 217

MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
Specification
drainage
- In case different values are found, adjust by loos-
ening the lock nut and use a screwdriver for the set
screw as shown in the figure.
Refitting the timing chain
The ignition advance is determined electronically on the basis of parameters known by the control unit.
For this reason it is not possible to interpret the reference values based on the engine rpm.
The ignition advance value is detectable at any time using the diagnostic tester.
It is possible to check whether the ignition advance determined by the injection system matches the
value actually activated on the engine, by means of the stroboscopic light.
Specific tooling
020922Y Diagnosis Tool
020330Y Stroboscopic light for timing checking
Proceed as follows:
- Remove the outside transmission cover as de-
scribed in the automatic transmission chapter.
PRESCRIBED CLEARANCE
Inlet
Desc./Quantity
0.15 mm (engine cold)
0.15 mm (engine cold)
Engine
ENG - 217