PIAGGIO MP3 500 i.e. SPORT Service Station Manual page 328

MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA
Suspensions
(2015)
Remove the two bracket screws after releasing the
spring and freeing the flexible transmission adjust-
ment.
It is very important to remove the flexible trans-
mission from its fitting only for replacement.
When refitting, tighten the two bracket screws and
the flexible transmission lever nut to the prescribed
torque.
Locking torques (N*m)
Bracket tightening screws
Undo the Allen screw and remove the switch.
Upon refitting, place the switch with the button ori-
ented to the stop indicated on the calliper lever,
observing the reference indicated on the switch
supporting bracket.
After refitting, check in detail that the switch is reg-
ularly activated by the stop on the lever.
SUSP - 328
8 - 12