PIAGGIO MP3 500 i.e. SPORT Service Station Manual page 176

MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
Engine
- Refit the water pump cover and tighten the 6 fix-
ing screws to the prescribed torque.
Locking torques (N*m)
Pump cover fixing screws:
Refitting the flywheel cover
- Install a new oil filter, lubricate the gasket, screw
on and finally tighten to the prescribed torque.
Locking torques (N*m)
Engine oil filter
12 - 16
- Install the supply hose to the cylinder and con-
nect the return hose to the pump cover using 3 new
clamps.
N.B.
TIGHTEN THE CLAMPS USING APPROPRIATE PLIERS,
PAYING ATTENTION NOT TO CONSTRICT THE HOSES
BUT ALSO TAKING CARE TO TIGHTEN THE CLAMPS SUF-
FICIENTLY.
- Install the pre-filter again and insert the engine oil
drain plug, tightening to the prescribed torque.
- Refill the engine with the prescribed type of oil.
Recommended products
eni i-Ride PG 5W-40 Synthetic based lubricant
for high-performance four-stroke engines.
JASO MA, MA2 - API SL - ACEA A3
Locking torques (N*m)
Engine oil drainage plug
ENG - 176
3 ÷ 4
24 to 30