PIAGGIO MP3 500 i.e. SPORT Service Station Manual page 162

MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
Engine
Removing the hub bearings
- Check all bearings (wear, clearance and noise).
In case of anomalies, proceed as follows.
To remove the gear shaft bearing on the engine
crankcase, use the following parts.
Specific tooling
001467Y014 Calliper to extract 15-mm diame-
ter bearings
001467Y034 Calliper to extract 15-mm diame-
ter bearings
001467Y031 Bell
- Use the special extractor to disassemble the
bearing on the engine chassis of the countershaft.
Specific tooling
001467Y006 Pliers to extract 20 mm bearings
001467Y035 Bell for 47-mm outside diameter
bearings
- Support the hub cover using the stud bolt set.
- Pull out the bearing using the special tool.
Specific tooling
020476Y Stud bolt set
001467Y006 Pliers to extract 20 mm bearings
001467Y007 Bell for OD 54-mm bearings
ENG - 162