PIAGGIO MP3 500 i.e. SPORT Service Station Manual page 159

MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
- Insert the nut in the original position (nut side in
contact with the belleville washer).
- Turn the central pulley nut to horizontally align
the holes and install the special tool.
N.B.
CHECK THAT THE STOP WRENCH TOOL IS EASILY IN-
SERTED INTO THE PULLEY AND IN THE ENGINE CRANK-
CASE.
Specific tooling
020474Y Driving pulley lock wrench
- Install the lock ring from the rear so that the
splines are completely engaged.
- Finally install the tool by siding the nuts by hand
and ensuring the tool is resting flatly.
- Tighten the driving pulley fastening nut to the
prescribed torque
- Remove the special tool.
Locking torques (N*m)
Driving pulley nut
160 - 175
Refitting the transmission cover
- Ensure the correct installation on the crankcase
of the 2 centring dowels.
Engine
ENG - 159